Choosing a corner bath: sizes, how to choose, TOP 7 best rating, reviews

The choice of plumbing fixtures on the domestic market over the past few years has been significantly expanded with new models of corner bathtubs and the materials from which they are made. Corner symmetrical and asymmetrical models attract many buyers with their beauty, practicality, comfort, and originality. With the help of such products, you can transform the bathroom beyond recognition, endow it with high functionality and comfort. This article shows the dimensions of corner bathtubs, both symmetrical and asymmetrical.

Design and principle of operation

A corner bathtub is installed adjacent to two walls in the corner of the bathroom, thanks to this the joint between the side and the wall is sealed, so water does not leak out.

A standard bath includes the following device elements:

• Drain grate. It is attached to the sealant, the sealing and pressure rings are put on from below, and the structure is fixed with an additional bolt.
• Tee for the drain system. Attached to the pressure ring so that the side outlet is directed towards the sewer pipe.
• Overflow grid. The overflow tube is connected to the tee using a siphon, the upper part of which is placed on the overflow tube, and the lower part is attached to the tee.
• Support.
  Usually these are legs and hooks that come with the bathtub. The hooks are attached to the wall, and the legs are installed on the opposite side. This system is considered very reliable. Additionally, handrails are installed to allow you to safely enter and exit the bathtub.
• Siphon. This is a pipe in which a certain volume of water always remains - it acts as a water seal.
• Bath mixer. It can be installed either on the wall or on the side of the bathroom. Some manufacturers build a water inlet into the bathroom and the technician needs to connect it to the system correctly.

About the standard sizes of bathtubs for corner installation

The standard bathtubs described in the article have the following dimensions:

• 1.5-1.8 meters is the side;
• no more than 400 liters is the maximum volume;
• 0.48-0.65 meters is the average depth of the products.

In addition, the traditional length of the corners of products, as a rule, is no more than one and a half meters. But if the room area is large enough, then you can purchase a non-standard model with large dimensions.

If you take a look at the modern plumbing equipment market, you will be able to see for yourself that a corner bathtub can have a wide variety of dimensions. If you wish, you can purchase a model with a fairly large bowl. On average, triangular products have dimensions from 90x90 centimeters to 200x200 centimeters. The most popular of them are models 120x120 or 150x150 centimeters.

Note also that the height also varies. The inside of the bathtub is smaller than the outside, but this does not have any effect on comfort. The difference in dimensions is important only when it comes to installation in a small room, in which literally every extra centimeter is valuable. And if the bathroom is large, then, first of all, functionality and the level of comfort are important in it, so they think about the size at the very end. If the corner model is large enough, then three people can easily fit in it.

Note! There are also so-called “sitz” corner baths, characterized by their small size and the presence of a special backrest.

Large products that can accommodate several people at once can also be equipped with such special backrests.

Functions and purposes

In terms of functionality, a corner bathtub is in no way inferior to bathtubs with a classic shape. And its compact dimensions help it fit perfectly into any limited bathroom space. Functions: Space saving. If you want your bathroom to be spacious and cozy, without losing its functionality, you need to think about buying a corner bath.

Corner baths are equipped with additional functions:

• hydromassage,
• air massage,
• chromotherapy,
• backlight,
• water purification function, etc.

Possibility of convenient placement when taking water procedures.

Advantages of corner models

A font installed in the corner of a room differs from others in its functional qualities, which allow us to talk about its advantages:

• The small design, installed in the corner, allows a tall person to relax and swim while reclining. Comfort is an important indicator when choosing.
• The advantages include the ergonomics of the model. Even a large bathtub installed in the corner of the room saves space. At the same time, access to other interior items is free and uncluttered.
• A bathroom with such a plunge pool always looks fashionable, while comfort remains a priority.
• The corner design is equipped with additional options. Their fullness is superior to other models. Lighting, hydromassage, audio system – these are not all the additional functionality. Manufacturers equip the bowl with armrests, a headrest, and handles. All this increases comfort.

It is possible to organize the space in the room at your own discretion if the installation of the mixer and drain is moved to a place chosen by the owners. Making your wish come true is real. After all, owners have the choice of purchasing a left-handed or right-handed font.

How to choose

It is important to consider the following parameters when purchasing.

Product dimensions . If you are limited in space, then you should pay attention to small models. The length usually does not exceed 150-160 cm. The footage increases due to the angular shape.

Material . Corner baths are made from:

• cast iron,
• acrylic,
• become,
• tree.

The price, convenience and durability of the structure depend on the material used. Acrylic bathtubs are the most popular; they are light in weight and durable.

Weight . Conventional cast iron options are heavy, which is their huge drawback. Acrylic or plastic is much lighter:

• Cast iron bath – from 100 to 170 kg.
• Acrylic (plastic) models of corner baths – from 15 to 35 kg.
• Corner baths made of steel – from 30 to 65 kg.

Models of corner bathtubs made of wood cannot be classified - they are made to order, the weight depends on the type of wood used in the manufacture, the thickness of the walls and the overall length of the product.

What not to consider when choosing a corner bath:

• Color. It does not affect the characteristics and quality of the product in any way.
• Presence of anatomical devices. This function is necessary for people who have problems with posture.

The most durable acrylic bathtub. Baths from the Czech company Ravak are the most popular in Russia. This is explained by the fact that during production the manufacturer uses a special high-heating technology, which increases the strength of the walls.

The most expensive bath. Some of the most expensive bathtubs are corner marble models - made in Italy.

The cheapest bath. Polish produces acrylic models and offers to purchase them at very reasonable prices. But there is one significant drawback - a thin layer of acrylic.

The most environmentally friendly bath. Kaldewei is a German company offering a wide range. The company assures that all materials are 100% recyclable.

The most wear-resistant bathtub. The production of bathtubs is the main activity of the Bette company.

Manufacturers have developed a unique enamel coating that is resistant to external factors and household chemicals.

The most durable bathtub. Cast iron, as already mentioned, is the most durable material.
The most famous brand producing corner cast iron models is Roca (Spain).

Bathtub in a small bathroom

In a small bathroom, it is worth rationally planning the placement of all items. You should think through to the smallest detail where the bathtub will be located, whether it will be acrylic or cast iron, and perhaps the designs will be asymmetrical. When choosing a design for a small room, it is worth considering the supply of cold and hot water, where it will be supplied from, the drainage point, and the appearance of the bathtub itself. To simplify the installation of such an accessory, a simple triangular model, but decorated with a glass wall, is designed for convenience and privacy in the bathroom. Expensive asymmetrical options with glass can be replaced with banal curtains, an economical solution for many.

A large bathtub that will occupy half the space is unprofitable; you need to focus on placing all the necessary parts. The bathroom, if it is combined, should have a small bathtub, compactly located shelves, appliances, and furniture. The only disadvantage of a small bathtub may be its cost compared to standard sizes. So, you can choose from products measuring 90 by 90 centimeters, or seated structures, or possibly asymmetrical ones, but the main thing about them is their depth, which varies from 40 to 60 centimeters.

Types of baths

If you choose an acrylic bathtub, you need to follow the rules:

• The ideal option would be white color, it will visually expand the space;
• it should be deep, especially if there are small children;
• stop choosing is on a triangular corner, without any frills;
• choose the correct installation angle to adjust the water supply and drainage.

With hydromassage

Hydromassage is a procedure in which water with air bubbles exert a certain pressure on the muscles. Water is thrown out from side nozzles installed along the sides along the bottom.

The direction and intensity of air-water flows are regulated.

One of the modes tones and invigorates tired muscles (nozzles for: legs, back, sides). The second relaxes, relieves stress, enhances metabolism.

Hydro procedures are recommended for people who are under constant nervous tension and have problems with the musculoskeletal system.

Characteristics:

• length 120-160 cm;
• depth 60-70 cm;
• volume 200-300 l;
• power consumption – from 800 W;
• hydraulic pump power – 800-1500 W;
• aero compressor power – 400-800 W;
• the total system power can be 3 kW.

Advantages and disadvantages

pros

Reduces tension . A soft, pleasant massage relieves stress and relaxes; after taking a bath, a person feels a surge of strength and vigor.

Speeds up the blood . Water bubbles affect the muscles, and the blood begins to actively move.

Relieves insomnia . After taking a bath, you will feel pleasantly tired and will be able to quickly and peacefully fall asleep in bed.

Keeps skin toned . Hydromassage strengthens muscles, cleanses pores and moisturizes the skin.

P allows you to get rid of joint pain. The healing properties of massage have been known for a long time, but sometimes the procedure is painful. Water massage provides a pleasant pastime, and after a month of such baths you will feel a significant improvement.

Asymmetrical

Bathtubs with an asymmetrical shape usually do not exceed 180 cm in length, but models are manufactured that exceed 200 cm. Most models are equipped with additional functions, fixtures and places for placing personal hygiene products:

• Hydromassage system - the number of nozzles and their purpose depends on the model.
• Waste kit.
• Support structure.
• Electronic control.
• Armrests and headrests.

This approach allows you to economically and practically use the space of the shower room.

Functionality is increased and there is plenty of space left.

Characteristics:

• length 100-200 cm;
• depth 54-67 cm;
• bowl capacity 70-1000 l.

Advantages and disadvantages

An asymmetrical corner bathtub always looks original and unusual. Designers really love this form. The bathtub complements their unusual geometrically complex interior.

Makes the room as comfortable as possible. A corner bathtub saves space due to its location in the corner, and its asymmetrical shape allows it to be supplemented with various shelves for toiletries.

A variety of models allows you to choose a corner bathtub that suits your specific shower room. In the store you can choose a model that will fit perfectly in your apartment. The bathroom can be equipped with various additions.

Despite the complexity of the form, the product does not exclude the possibility of connecting various additional devices.

Availability of seating and armrests. Manufacturers think of two places for a person’s possible position and complement the ensemble with comfortable armrests that allow you to sit freely. Cons Large sizes . Asymmetry suggests the presence of large space in the shower room. Instability, in case of purchasing a low-quality product or a fake.

The unusual geometry of the model requires high-quality support.

Unscrupulous manufacturers may sell you a design that is attractive in appearance but unstable.

Models:

• Ravak Asymmetric 150,
• Am.Pm Inspire 160x100,
• Aquanet Jersey,
• Bas Sagra 160x100,
• Kolpa-San Calando L/R.

final grade

The best corner acrylic bathtub is different for everyone - it all depends on design preferences, the need for functions and the dimensions of the bathroom. But the leaders of our rating will help you navigate the capabilities of modern bathtubs and their pitfalls. Let us summarize the main points that will help with your choice:

• Dimensions and shape of the bowl;
• Bathroom depth;
• Need for massage functions;
• The presence of a mixer, screen, shower head, headrests;
• Control type (electronic/pneumatic);
• Availability of anti-slip coating;
• Capacity (single or double);
• Useful volume of the bowl;
• Additional coating properties;
• Availability of backlight;
• Location of the drain hole;
• Mirror or one-sided design;
• Functionality of sides and shelves;
• Quality of processing of cuts and seams;
• Number of nozzles;
• Bottom slope.

All these characteristics should be taken into account before purchasing a bathtub. If you doubt whether the chosen model will be comfortable, you can exercise your right to test the product and lie down in the bathtub you like directly in the salon, trying to reach the control systems from a lying position, paying attention to the deflection of the bottom and listening to the sensations from the location in the bathtub. To avoid any unpleasant surprises after purchasing and installing the model, it is better to check everything “on shore”.

Cast iron

Corner cast iron bathtubs are quite rare. This is due to the fact that cast iron is difficult to process and requires the use of expensive technologies and mechanisms. Basically, bathtubs are made in rectangular or oval shapes; they are not equipped with additional functions (hydro- and aeromassage) due to the nature of the material.

Characteristics:

• length 100-180 cm;
• depth 50-70 cm;
• weight 70-150 kg;
• bowl capacity 60-1000 l.

Advantages and disadvantages

Durability . Cast iron options still remain leaders among other products, and all because breakdowns are practically excluded.

Wear resistance . The bath itself will remain intact despite any external damage. Only the enamel will crack and can be replaced.

Resistance to temperature changes.

The bath does not react to changes in water temperature; chips and cracks do not form on the surface.

Ease of use . The cast iron bathtub has a high load-bearing capacity, the metal does not slip, which provides comfortable conditions for taking water procedures.

Economical purchase . The initial cost of the product is high, but replacing the bathtub will only be required after several decades.

Easy restoration . You can maintain a good appearance by covering the surface of the bath with a special shine once a year.

Retains the heat of water for a long time.

The bath will take a long time to warm up, but due to the high thermal conductivity of cast iron, the water temperature will be maintained for a long time.

Minuses

Huge weight . Cast iron is a very heavy metal, the average bathtub weighs about 100 kg.

Difficult to install . Due to its weight, the bathtub is difficult to move and lift, which complicates the installation process.

High price . The use of the latest technologies will have a negative impact on the price.

The enamel is susceptible to chips and cracks. The protective layer is easily damaged.

Models:

• ROCA Continental 170×70 cm,
• Jacob Delafon Parallel 170×70 cm,
• AQUALUX ZYA 8-1 150×70 cm,
• Sanbanho Favorit 170×70 cm,
• Station wagon Classic 150×70 cm.

Comparative table of presented corner baths

The comparison table will help you decide and choose what suits you. Watch, study, choose!

Model	Dimensions, cm	Weight, kg	Volume, l	Form	price, rub.
GEMY G9080	150x150x67	105	200	¼ circle	145600
TRITON VICTORIA	150x150x67	60	450	quarter of a circle	81000
JACOB DELAFON MICROMEGA DUO 170X105E60220CR	170x105x44	25	270	non-standard	38290
AQUATEK BETTA 170X97	170x97x67	45	250	non-standard	19950
GEMY G9086	170x135x70	95	250	¼ circle	100100
GEMY G9083 B	180x122x76	115	280	asymmetrical	78000
AQUATEK SIRIUS HM (ELECTRONIC)	164x164x71	80	460	quadrant	75140

Steel

Steel is easier to machine than cast iron, so there is a wide range of sizes and shapes on the market. Unlike cast iron bathtubs, they are equipped with additional functions: hydro and air massage.

Characteristics:

• length 70-190 cm;
• depth 40-75 cm;
• volume 50-1200 l;
• weight 20-40 kg;
• price 8000-50000 rub.

The price of corner steel bathtubs is significantly lower than cast iron ones. But in addition to price superiority, steel hot tubs have a number of positive properties.

Advantages and disadvantages

• Easy to install . The light weight allows the bath to move freely, making it easy to install.
• High hygiene of the coating . Steel does not accumulate dirt, and all harmful bacteria are washed away with water.
• Fast heating . The walls of the bath are quite thin and do not take much time to warm up.

Minuses

• High heat dissipation . Unfortunately, the water cools quickly. Thin walls are not able to store heat for a long time.
• Instability . Steel bathtubs are lightweight and can tip over.
• Short service life .
  Steel quickly loses its appearance and wears out quickly. It is recommended to replace a steel bathtub every 10-15 years.
• Not possible to repair . Damage cannot be repaired with tools and paints. Thin enamel is prone to cracks. With the slightest external damage, chips appear on the surface, growing throughout the entire bathtub.

Manufacturers offer many interesting shapes, sizes, and different shades. Steel options will be cheaper, but the service life will be halved.

Models:

• VAIO DUO 8 953,
• Rondo 6 706,
• Studio 828-1
• PLAZA DUO 190,
• Punta Duo 3 910-1.

Acrylic

Corner bathtubs made of acrylic are the most popular type. A variety of models are made from this material, from a budget option to luxury baths with additional functions.

Characteristics:

• depth 50-80 cm;
• length 140-185 cm;
• volume 400-1000 l;
• weight 10-30 kg;
• wall width 6-12 mm.

Selection rules

When answering the question: which corner bathtub is better, you need to take into account several basic principles:

• Product form. In the classical sense, the angle is a quarter of a circle in the form of an isosceles right triangle, but modern industry suggests more configurations. The bathtub can be rounded on one or more sides, have a multifaceted shape, or be made in the form of a trapezoid. The range appeared after the use of acrylic for the production of sanitary products. The material bends perfectly, so it can take complex shapes;
• Dimensions. You need to select the size of the bathtub based on the parameters of the room and personal preferences. If desired, even a standard room can be easily accommodated with a two-meter structure, which can easily accommodate two adults. For children, such a bath is a real space for playing with water. But still the most popular option is a design with a length of 1.4 meters. As for the depth, most often it ranges from 0.45 to 0.65 meters;
• Material. The best sellers are bathtubs made of acrylic. They are light, beautiful, make less noise when filling, maintain the water temperature well, and are available in different colors and options;
• Material thickness. Unscrupulous manufacturers of acrylic products can save on material by making the products too thin. Such a bathtub will be deformed by the weight of an average adult. It is better to choose a bathtub of medium thickness on a metal frame-stand, which dampens vibrations and allows you to adjust the height;
• Additional options. You can choose a simple solid bowl, or you can choose a bathtub with a removable screen. Additionally, faucets, hydromassage devices, lamps, water purification devices, and so on are selected. Some models are presented with a certain selection of pre-installed devices, while for others you can assemble the functionality yourself. How profitable this or that option is in terms of price must be compared on the spot.

Note that a good corner bathroom is a relative concept. Each family has its own requirements for products that come to the fore when choosing a bath.

For two

Corner models are convenient because they have a fairly comfortable fit. Unfortunately, you can only sit in it, but there are comfortable armrests and railings on the sides.

Characteristics:

• depth 50-75 cm;
• length 160-185 cm;
• volume 400-1000 l.

Advantages and disadvantages

• Ease of use . Thanks to the huge bowl, one person can take different positions. Even two people will feel comfortable.
• Originality . We are used to the fact that the bathtub can accommodate one person. The corner option looks unusual and sophisticated. A large corner bath can become a mini pool for you.
• Variety of formats . Manufacturers offer customers various shapes and designs.
• Possibility of connecting additional functions.

Minuses

• Requires a lot of space . The corner bathtub for two is large, so owners of small shower rooms cannot afford such a model.
• Difficulty in cleaning . To wipe the bathtub and treat it with protective agents, you will need to climb into it.

Models:

• KOLPA-SAN Chad 170×120 cm,
• AQUATEK Altair 160×120 cm,
• RAVAK LoveStory II 200×140 cm,
• RIHO Doppio 180×130 cm,
• Jacob Delafon Presquile 150×150 cm.

Functions of the corner model

The consumer's favorite feature of corner models is hydromassage. It is used not only for relaxation after a working day, but also as a therapeutic procedure. Manufacturers also included other additions:

• remote control panel;
• massage using air bubbles - installed aeromassage;
• therapeutic procedures using chromotherapy;
• treatment and relaxation with aromatherapy;
• regulation of water flow;
• devices for the head and elbows of soft and hard design;
• shelf or holder on the bowl structure for towels and linen;
• thermometer showing the temperature of the liquid;
• the water level is reflected on a special sensor;
• footrest;
• drain-overflow;
• automatic cleaning and disinfection of the bowl.

Such options are installed only on high-cost hot tubs. Their quantity determines the price. When purchasing a corner bath, it is recommended to ask about the possibility of completing it. Symmetrical models do not have additional functions.

From cast marble

A marble bathtub is made from a mixture of marble chips and acrylic resins by casting. The technology uses marble of natural origin and artificial materials.

The technology involves making corner bathtubs from marble of any shape - symmetrical and asymmetrical.

Standard Features:

• depth 40-60 cm;
• length 120-150 cm;
• volume 100-500 l.

Advantages and disadvantages

• Persistence . Products made from cast marble are considered one of the most durable; there are practically no cracks or scratches left on the surface unless they are applied with heavy, sharp objects.
• Variety of shades . Marble can be painted in any color; natural colors of stones and other materials are imitated during the casting process - the quality depends on the technical properties of the filler and additives.
• Silence . The stream of water is almost inaudible.
• Keep warm .
  Cast marble, like cast iron, has high thermal conductivity, so the water remains hot for a long time.
• Ease of repair . A bathtub made of cast marble can be repaired without any problems; even the largest potholes can be easily removed.
• Low price . New technologies have made it possible to reduce the cost of producing marble models through the use of artificial stone.

Minuses

• Difficulty of care . For care, it is necessary to purchase special products, since the surface is susceptible to household chemicals.
• They are afraid of prolonged contact with water .
  When water is left in the bath for a long time, the salts contained in the water leave a permanent stain on the bottom.

Models:

• Jacob Delafon Elite 175x70 cm,
• Villeroy&Boch Oberon 180×80,
• FEMA Style Alessandria 170×80 cm,
• FEMA Style Renata 150×150 cm,
• Alpen 170x80 cm.

Classification of corner baths by material of manufacture

The modern assortment contains both the simplest bathtubs and elite designer ones. The use of unexpected forms of this plumbing fixture was made possible thanks to the use of new materials in the production process. And such a wide range in tandem with a large price range allows a person of any income to purchase a corner bathtub for themselves. Let's consider what these baths can be based on the type of material used.

Option No1. Cast iron products

Traditionally, various containers for washing have been made from cast iron for many decades, and it is not surprising, because this material is well known for its reliability, durability and excellent strength properties. However, corner models made of cast iron are extremely rare, and they are produced exclusively to order. Why are such baths unpopular today, you ask? The thing is that they weigh a lot (the weight can reach up to 150 kilograms), and at the same time they are quite expensive (on average, in the range of 55-80,000 rubles).

1. Cast iron can take on the most intricate shapes, and therefore only certain manufacturers of plumbing fixtures produce such models (almost manually). Let's get acquainted with the main advantages of this type of bathtub.
2. Possibility of repairs. Most of the defects that appear on a cast iron product during operation can easily be eliminated by re-enamelling (there are other options - installing an acrylic liner, for example, or applying liquid acrylic).
3. Long service life. A corner bathtub made of cast iron can last more than fifty years, without losing its original performance properties. And the only evidence of long-term use may be cracking or yellowing of the enamel coating, which, as we just found out, can be easily restored.
4. Low thermal conductivity. The latter for any cast iron product is quite low, thanks to which the bath can maintain high water temperature for about an hour.
5. High strength. The minimum wall thickness is on average 0.8 centimeters, so their mechanical strength is at a fairly high level, as well as resistance to damage or shock.

Important information! When purchasing a cast iron bathtub, professionals advise paying attention, first of all, to the weight of the product. A model with an angular design, made of this alloy, can weigh from 150 to 170 kilograms, depending on the size and shape of the bowl, and together with a bathing person and water, the load on the floor can reach as much as 500 kilograms!

In short, it is recommended to install such large containers exclusively on solid concrete foundations.

Option No2. Steel products

These bathtubs are more popular than those described above, but are still representatives of the lower price group. By the way, steel is much easier to process than cast iron, due to which models made from this alloy are characterized by a wider range of dimensions and shapes. The low (relatively) weight allows such bathtubs to be transported/installed even alone.

However, corner models made of steel also have their disadvantages, which are discussed below.

1. Low maintainability. The enamel coating on bathtubs made of steel quickly deteriorates, while it is extremely difficult to restore it due to the small thickness of the walls of the appliances.
2. Low stability. Steel bathtubs (especially in the corner version) are very unstable due to their design features and low weight, and therefore they are installed using a special reinforcing frame or, alternatively, supported by three walls.
3. Short service life. If the use is intensive, then the steel bowl will not last more than 10 or 15 years, and the enamel, as we just noted, wears out the most intensively.
4. High thermal conductivity. Yes, for steel it is quite high, because bathtubs made from this alloy cool quickly, which is why the comfort of use is noticeably reduced.
5. Fragility of the enamel coating. Any steel bathtub is, first of all, a thin-walled device that can be deformed by impacts or under significant weight. As a result, the enamel begins to peel off and crack.
6. Noisy. When you draw water, the walls of the steel bathtub will begin to vibrate, the sound of the hitting drops will intensify - in a word, quite a noise will arise. And if the room is small, then the resonance of the steel will be even more noticeable. Although this disadvantage can be partially neutralized using insulating material.

It is also worth noting that by installing a steel corner bathtub yourself, you can minimize the negative aspects of using such a product. To increase the cooling time of the water, and also to reduce the noise from the rising water, treat the bottom surface of the container using vibroisol or, alternatively, polyurethane foam.

Option No3. Acrylic corner baths

But a corner bathtub made of acrylic is the most popular option for those rooms where installing traditional rectangular containers is impractical. The same applies to oval-shaped models. Acrylic itself is a thermoplastic polymer; it can be easily given almost any desired shape, which means that the shape and dimensions of bathtubs are very diverse.

Typically, acrylic is used to produce not only budget small-sized bathtubs designed for cramped rooms, but also bulky expensive containers equipped with a number of additional functions. Let's get acquainted with the main advantages of acrylic products.

1. Care is extremely simple. Caring for an acrylic surface is quite simple, as it has a so-called “self-cleaning effect” due to its smoothness and lack of pores. Any dirt from such a surface simply slides off, but is not absorbed into it, and therefore you can easily keep the bath clean.
2. Light weight. Acrylic itself is quite light, and bathtubs made from it, despite their size, are light. Thanks to this, the transportation/installation process is noticeably simplified, but this does not in any way affect the quality and service life of the bowl.
3. Originality of design. Acrylic is extremely easy to process and therefore can take on any, even the most complex, shapes. For this reason, acrylic bathtubs always look fresh and original.
4. Aesthetics. The acrylic coating is even and smooth, it remains just as shiny throughout its entire service life, but, as we have already found out, it does not require complex maintenance. Even with prolonged contact with water, acrylic does not turn yellow or become dull.

Video - Features of corner acrylic bathtubs

Note! According to professional craftsmen, acrylic bathtubs have one significant drawback - low mechanical strength. Even an accidentally dropped bottle of shampoo or a tube of toothpaste can cause a hole in the material, especially if the cost of the bath is low.

And in order for the bowl to withstand the weight of a bathing person and water, installation must be carried out using a frame or reinforcing frame.

It is also worth noting that acrylic is an environmentally friendly material because it cannot provoke an allergic reaction. In addition, fungi or harmful microorganisms do not appear on it. Finally, the thermal conductivity of acrylic products is quite low, which means that the water in the bath will cool slowly.

On legs

In the recent past, clawfoot bathtubs were rare and only the wealthy could afford them. There is now a wide range of models available, and the demand for them has increased significantly.

Experienced designers give legs all sorts of shapes and make them as attractive as possible. The great demand for such products is explained by the desire of people to create a luxurious environment in their bathroom.

At the same time, the space of the room visually increases, so there is a feeling of spaciousness and comfort.

Characteristics:

• leg length 10-50 cm;
• quantity 2-5 pcs.

Advantages and disadvantages

• Reliability of the design. The legs are a proven method of support and have a high load-bearing capacity.
• Low cost.

Minuses

• Unpresentable appearance.
• Plumbing and electrical connections are not hidden. An additional screen needs to be installed.

Models:

• RIHO Dorado 170×90 cm,
• Actima Aurum 170×70 Lux,
• Bas Alegra 150 cm L,
• VitrA Comfort (170×75 cm),
• EXCELLENT Arana.

On the podium

Mostly models made of marble and wood are installed on the podium - the podium carries a functional load. Before installation, the floor is leveled, filled with cement and then installation begins. For wooden bathtubs, the podium is made separately.

Lightweight models made of acrylic and steel are often installed on the podium due to design decisions, or to add rigidity to the structure.

Characteristics:

• podium height 10-70 cm;
• wall thickness 6-12 mm.

Advantages and disadvantages

• Sustainability . The podium is installed on a foundation, so this design is reliable.
• Originality . If the dimensions of the room allow, the podium will help create an imitation of a bathtub integrated into the floor.
• Unusual interior . A podium, even just one step, can radically transform a room.
• Performing a technical function .
  The podium allows you to hide communications while maintaining safe access to the sewerage pipeline.

Minuses

• Difficulty in installation and installation . Creating a frame requires raising the floor surface in the entire room to the required height. This is achieved by installing a raised floor or ceilings, which are installed on additional supports near the walls of the room.
• A fairly large area is required . In order to create beautiful curves of lines, numerous steps, bathtubs and other decorative elements, space is needed.

Models:

• BLB Europa 120×70 cm,
• KALDEWEI Eurowa 170×70 cm,
• ROCA Contessa 100×70 cm,
• RIHO Future 170×80 cm,
• FEMA Style Alessandria 170×80 cm.

Semicircular

A semicircular corner bathtub will look elegant and stylish in any shower room. It appeared after the start of production of standard triangular ones. This option quickly gained popularity among buyers.

Characteristics:

• length 150-180 cm;
• depth 48-65 cm;
• bowl volume 300-500 l.

pros

• Looks good. The semicircular shape looks neat and fits into any interior.
• Convenience. The semicircular shape allows you to increase the size of the model, so two people can fit in it at once.
• Possibility of connecting additional functions.
  In such options, hydromassages, lighting, filtration, etc. can be easily installed.

Minuses

• The need for a large bathroom. The rounded side increases the size of the product, so this model is installed in spacious rooms.
• Price. The cost of a semicircular shape is significantly higher than that of standard triangular shapes.

Models:

• AQUATEK Virgo 150×100 cm,
• KOLPA-SAN Chad 170×120 cm,
• Jacob Delafon Presquile 150×150 cm,
• RIHO Lyra 170×110 cm,
• Vidima Seva Mix 140×140 cm.

With doors

Doors come in various shapes and types, so the design is always individual. They can give the space a modern, neat look.

Characteristics:

• wall height 120-200 cm;
• width 30-70 cm.

pros

• Practicality. The doors protect the walls and floors of the bathroom from constant wetting and soap suds.
• Convenience. A person taking a shower does not have to limit himself and does not have to worry about getting the walls and floor wet.
• Hygiene. Doors are usually made of glass and plastic, which are easy to clean.
• Compactness. The doors won't take up much space.
• Durability.
• Easy to install.

Minuses

Price. Such devices require additional expenses. Lack of light. When taking water procedures, the doors fog up, so the light will be dim, which is unsafe.

Models:

• Cristalli di hafro Vasche 3FLA1S6,
• Era Plus box Gruppo Geromin 3ERA4S6,
• Teuco 385 385,
• Gruppo Treesse Corner Tubs V8267 B8220,
• BluBleu Xxline Thea Box.

With shower

A corner shower with bathtub is primarily suitable for small spaces. Also, this type of equipment will fit perfectly into bathrooms with non-standard layouts.

This combination has two advantages:

1. you can choose whether you want to take a bath or shower;
2. this solution will look unusual.

Characteristics:

• sizes from 80*80 to 120*120;
• tray height 40-60 cm;
• cabin height 210-240 cm;
• width 70-75 cm;
• length 150-170 cm.

Advantages and disadvantages

• Compactness. The cabin is designed for a vertical position of a person, so the dimensions of the bottom are noticeably reduced, since there is no need for much space on the floor.
• Saving water.
• Safety. The low sides of the tray will support you when leaving the cabin. Injuries are kept to a minimum here.
• A bath with shower is recommended for people with diseases of the cardiovascular system.

Minuses

• Cluttering of space. Although the product does not take up much space around the perimeter, its height reaches two meters, which is why the space visually narrows.
• Low hygiene. Bacteria quickly infect the booth and accumulate on the trays. The fungus can also cover the high walls of the cabin.
• High price.

Models:

• Cristalli di hafro Vasche 3DUA1S6,
• Teuco 252m 252M FY 2 C,
• Angeletti Ruzza Design 546M,
• BluBleu Xxline Hera Box,
• Gruppo Treesse Large Tubs V7637T B7620.

With glass curtains

A bathtub with glass curtains allows you to take a shower without splashing the room with water and eliminates the need to wipe the walls and floor from soap and splashes after each bath.

They do not take up much space and do not interfere with enjoying the procedure even in a sitting position. In addition, the bathtub is refined and looks original.

Characteristics:

• curtain height 150-240 cm;
• width 3-5 mm.

pros

• Durability. The curtains will definitely last longer than their PVC counterparts.
• Hygiene. Any stains are easily washed off.
• Practicality. Convenient to use and do not interfere with water procedures. Ease of use.

Minuses

• High probability of breakdowns. Due to active use, poor-quality fasteners may soon break.
• High price. It is most practical and durable to purchase doors made of tempered glass, with patterns applied or even painted, despite the fact that PVC analogues are several times cheaper.

Models:

• Brand VITA 150x70,
• BluBleu Xxline Thea Box,
• Akrilan Laguna del Medio 160×160,
• Relisan Zoya 150×95,
• Orata B 100x113.

What shapes do corner baths come in? Overview of options

So, we found out that a corner bath will be an excellent solution for those who have a small bathroom. And if you compare such models with the usual rectangular ones, it immediately becomes obvious that the previously mentioned compactness allows you to save as much free space in the room as possible. Moreover, as a bonus, you will receive an attractive design element, and you will also be able to see for yourself how easy the corner products are to use.

Note! There is a misconception among buyers that such bathtubs are produced exclusively in the form of an isosceles triangle with one slightly rounded side. However, in reality this is not the case.

Today on the plumbing equipment market you can see corner models of various shapes; in particular, such baths can be:

1. triangular;
2. with one corner beveled or rounded;
3. in the form of asymmetric polygons;
4. trapezoidal.

Note that the classification into right- and left-sided types applies to all of the varieties listed above. Therefore, be sure to take this point into account and, if necessary, consult with a specialist in order to choose a model with the correct orientation.